The Use of Kingston Memory for your PC and Laptop

Computer and laptop need a big space of the RAM in order to allow you to keep many things in it. RAM is Random Access Memory that helps in improving the application speed and the overall performance of your system. Adding more RAM to a computer is one of the best, easiest, and most cost-effective upgrades a computer owner can perform.
Each and every program installed on your computer uses RAM, and increasing the RAM capacity lets you open more files and programs simultaneously known as multitasking, while upgrading to speedier RAM boosts overall application performance, especially in computer games and multimedia-intensive applications. Compared to other potential upgrades, upgrading the RAM is fairly cheap and is easy to install (no driver updates or other maintenance is required), and the enhancements are immediately noticeable.

However, whenever you are making such upgrade, reliability is a major issue. The hardware that you replace has to be reliable, long lasting and best. Kingston is a manufacturer that specializes in making high-quality, affordable computer memory. Replacing your RAM is quite an easy task as there is just one specific way to do so. Let’s look at some easy steps to achieve this.

• First of all, unplug your computer. It is really important to unplug all the cables to avoid any kind of electrical mishap.

• Now, open your computer's case by removing the two large screws that hold the side panel of your computer in place and sliding it off.

• Once you have opened the case, locate your computer's PCI slots which are long, narrow plastic slots located on your computer's motherboard.

• Now, plug your Kingston Memory into the available PCI Slot. Don't worry about plugging it in wrong as it can only go in one way due to the grooves on the bottom of the chip. Push it gently down into the slot until you hear a "clicking" noise of the clip that holds it into place firmly securing it into the slot. If you are replacing the RAM, make sure you gently pull out the other one before pushing the new one in.

• Now, screw the computer's case back on and plug it in.

Boot the computer and you will be ready to roll with the additional memory.

The steps are easier for Laptops.

• First of all, turn of your laptop and remove the battery and turn your laptop upside down so that the bottom is facing you.

• Using a screwdriver, remove the cover to the RAM compartment on your laptop which is a small square lid held into place by five small screws.

• Place the Kingston RAM chip into place. Instead of pushing down into a slot like a desktop RAM chip does, this one snaps into place.

Close the RAM compartment back up by screwing it securely back into place. Turn your laptop on and you are ready to roll.
It’s important to know the capacity of your computer and laptop RAM in order not faces any problem with your PC. Also, RAM will allow you to add anything you want and keep it for a long time in your computer. Try to install Kingston Memory and enjoy with its advantages and abilities.